Paxton Net2 I/O board – Plastic housing | 385-710

Description

About – Paxton Net2 I/O board plastic housing consists of four inputs and outputs which connects directly to a LAN/WAN via an onboard RJ45 connector. I/O boards can be distributed around a building as required. Inputs and outputs can be controlled using the Net2 software ‘triggers and actions’ feature. Boards can be supplied as PCB only, in a plastic housing or mounted within a 2A boxed metal/plastic mains monitored backup power supply.

Installation – A label clearly shows the connections. The Paxton Net2 I/O board is fitted with the same rising clamp connectors as the Net2 control unit.

Operation – Inputs and outputs are configured using the Net2 software triggers and actions feature.

System specifications – 

Inputs – 4
Relay outputs – 4

Electrical – 

Operating Voltage – 10V – 14V DC

Current consumption – 400mA

Relay contact current rating – 13A

Relay contact isolation – 4kV AC

Relay contact voltage – 240V AC

Relay contact frequency – 50Hz

Communication

TCP/IP – Yes

Wireless – No

RS485 – No

Ethernet network speed – 100Mbit/s auto MDIX

Ethernet bandwidth requirement – 200 kbits/sec

DHCP support (fixed IP recommended) – Yes

Environment

Operating temperature – -20°C – +55°C / -4°F – +131°F

Moisture resistance – No – if used externally, it must be protected in a weatherproof housing.

Vandal Resistance – No

Installation instructions available here.

Find out more about us here.