Paxton NET2 682-531 Plus 1 Door Controller – 12V 2A PSU, in Plastic Cabinet

Description

Paxton Part no 682-531

About – Net2 is a networked access control system. A networked system gives the advantages of central control, event reporting and flexible control over users’ access. Each control unit is part of a network but can run independently making its own decisions and remembering events.

The Net2 plus control unit connects to the central administration PC using an RJ45 plug into a standard TCP/IP Ethernet network. This greatly increases the flexibility of installation options on sites that have LAN/WAN networks. The Net2 plus control unit also has a RS485 connection. This means it can be connected to other Net2 plus or Net2 classic control units using a dedicated CAT5 cable.

One Net2 plus control unit can be the network interface to the LAN and also run a wired RS485 daisy chain of other Net2 plus or Net2 classic units, removing the need for an independent TCP/IP to RS485 converter. Net2 plus is also available with a Power over Ethernet (PoE) power supply. PoE is a technology that allows both power and data to be passed along Ethernet cabling. Net2 plus with PoE simply plugs straight into the existing LAN using a standard RJ45 plug (providing it is powered by either a compatible PoE switch or a PoE injector).

Control units are sold as a PCB only, within a plastic housing or mounted within a 2A boxed metal/plastic mains monitored backup power supply. The Net2 plus unit now comes with PoE+ power supply in metal/plastic cabinet; no separate mains supply back-up required.

 

Box contents

·         Connector – 2 way plug UL

·         Connector – 3 way plug UL

·         Connector – 4 way plug UL

·         Connector – 5 way plug UL

·         Connector – 6 way plug UL

·         Connector – 8 way plug UL

·         Fasteners – 15mm PCB spacer 1.6mm board

·         Fitting kit – ACU with PSU in cabinets & housings

·         Label – 682-531 ratings label

·         Label – product serial number label 27x10mm

·         Label – Tech support international

·         Label – Void if seal is broken, 80x30mm

·         Sales Code label, 27x20mm, Paxton EX, CE, Ctick

·         Net2 Plus access control unit V2

·         Cable tie Large

·         Net2 International Wiring Label Assy

·         2A plastic cabinet assy with PSU

Specifications – Net2 plus 1 door controller – 12V 2A PSU, Plastic cabinet
	min	typ	max	units
Electrical
Voltage supplied by Paxton 2A PSU	13	13.8	14	V DC
Current capacity of Paxton 2A PSU			2000	mA
Operating voltage	11		24	V DC (+20%)
Current consumption			200	mA
Switchable current			4	A
Switchable voltage			24	V DC (+20%)
Alarm output current			1	A @ 12 V DC
Environment
Operating temperature – Battery limits	0		45	°C
Moisture resistance		None
System Specification
Max number of wireless ACUs per system			1000
Number of card holders			50000
Number of PINs			50000
PIN length	4		8	digits
Number of codes			50
Code length	4		8	digits
Readers/keypads per door			2	per port
Door open time	1	7	999999	sec
Time zones			64
Individual times within a time zone			2000
Number of events stored on ACU			2728
Data retention during power loss	30			day(s)
Can be used with fail OPEN release		Yes
Can be used with fail CLOSED release		Yes
Exit button input		Yes
Door contact input		Yes
Alarm/bell output		Yes
PSU monitoring input		Yes
Tamper input		Yes
Intruder alarm integration input		Yes
Wiring
Reader cable type		Belden 9540
RS485 data line		CAT5 or Belden 8723
Max RS485 data line length			1000	m
Max number of ACU’s per RS485 data line			200
TCP/IP connection		Yes
Max TCP/IP nodes			200
Ethernet network speed	10		100	Mbps
Ethernet bandwidth required	9	115	200	kbps
DHCP support		Yes (static IP recommended
Modem support		Yes
Dimensions – Control unit
Width		116		mm
Height		126		mm
Depth		25		mm
Dimensions – 2A PSU in plastic cabinet
Width		232		mm
Height		320		mm
Depth		80		mm

 

Find out more about us here.